 | (#13) Bipost |
Bipost
Tip# 13 on Paramount's chart of tips and plugs
Fits older Speed Graphic cameras, Crown Graphic, Wollensak Lenses, Rodenstock Lenses, Camerez and Photo Control cameras. Identified by two pin contacts protruding from the lens about 1/4 inch apart. |
 | (#14) PC Female |
PC Female
Tip# 14 on Paramount's chart of tips and plugs
Fits into most PC cords, used mostly for extension and adapter applications. ( identification: for center contact, Female PC has "hollow tube" and Male PC has "pin". ) |
 | (#15) Miniphone 3.5mm |
Miniphone ( for Pocket Wizard ) 3.5MM
Tip# 15 on Paramount's chart of tips and plugs
Fits Pocket Wizard transmitters and receivers, the Flash Wizard and other products from LPA Design.. The tip is molded at a right angle. The cords listed in this section are the only cords recommended for the LPA products, and are supplied to the manufacturer by Paramount. |
 | (#16) Household |
Household (HH)
Tip# 16 on Paramount's chart of tips / plugs
Fits most Professional flashes with dual blade receptacle, such as Lumedyne, Norman, Braun and Dynalite. Units with 3-prong plug can also use this plug. Examples of the 3-prong plug are Dynalite (3 flat blades), Sunpak and Quantum Radio 4i (2 flat blades with 1 round blade in center). Third prongs prevent plugging these cords into wall sockets!
Also available in a Household (HH) ( Gold Plated )
|
 | (#17) HH Female |
HH Female
Tip# 17 from Paramount's Chart of tips and plugs.
Accepts Household male plug. Commonly used on extension cords adapter cords and for use with slaves. Can be inserted both ways if polarity is an issue. |
 | (#18) Metz 6 (contact) |
Metz "6" Fits Metz 45 CT3, 45CT4, 45CL3, 45CL4, 60CT4 and 45CL1
Tip# 18 on Paramount's chart of tips and plugs.
(original Metz cord has 6 contacts on each side of the flat strip; our version has only one small strip contact on each side; the other strips are not actually used and have been omitted). Heavy-duty construction makes this tip reliable and long lasting without failure. |
 | (#19) Hot Shoe |
Hot Shoe (male)
Tip# 19 on Paramount's chart of tips and plugs.
Fits most cameras with hot shoe feature and works with hot shoes featuring larger center contact. Unique design allows shoe to slide in either way. Cord faces side rather than back-to-front. Converts "dedicated" mode to "standard sync". The only alternative to the PC ! Tip #19 |
 | (#20) Metz 8 (contact) |
Metz 8 Fits 60 CT1, 60 CT2, 45 CT5
Tip# 20 on Paramount's chart of tips and plugs.
Original Metz cord has 8 contacts on each side of the flat strip; our version has only one small strip contact on each side; the other strips are not actually used and have been omitted). Heavy-duty construction makes this tip reliable and long lasting without failure. |
 | (#21) Metz 45 CT1. |
Metz Square
Tip# 21 on Paramount's chart of tips and plugs.
Fits Metz 45 CT1. Heavy-duty construction makes this tip reliable and long-lasting without failure. |
 | (#22) Monolite/ 1/4 " |
Monolite ( 1/4 inch Phone plug )
Tip# 22 on Paramount's chart of tips and plugs.
Also referred to as a 6.35 MM plug, fits Bowens, Monolite, Balcar, Speedotron, and the like. Large single pin 1 1/2 long 1/4 inch thick. Plug is molded at a right angle (always facing in the right direction), which reduces stress at the plug. |
 | (#23) White Lightning (1/4 inch Stereo Plug) |
White Lightning (1/4 inch Stereo Plug)
Tip# 23 on Paramount's chart of tips and plugs.
Fits White Lightning units accepting 1/4 inch single pin type stereo plug (identified as stereo by two black insulators on its shaft). Stereo plug is required for White Lightning units to operate properly.
|